Table 5

Approved Meter Service Devices

(print from .pdf)

Effective August 15, 2013
Updates All Previous Tables

Single Phase, 2 to 6 Positions
Overhead & Underground Entrance
100 or 200 Amp, 120/240 or 208/120 Volt
4 or 5 Terminal

MFG. & CATALOG # 5th Terminal Accessory If Required
(See Note #3)
SERVICE AMPS NUMBER OF POSITIONS WIRING COMPARTMENT LOCATION
CUTLER HAMMER
1004400A-CH ARP00035CH 100 2 End
1004402A-CH ARP00035CH 100 3 End
1004405A-CH ARP00035CH 100 4 End
1004401B-CH ARP00035CH 200 2 Center
1004404B-CH ARP00035CH 200 3 Center
1004438B-CH ARP00035CH 200 4 Center
1004439B-CH ARP00035CH 200 5 Center
1004440B-CH ARP00035CH 200 6 Center
DURHAM
1004400A ARP00035 100 2 End
1004402A ARP00035 100 3 End
1004405A ARP00035 100 4 End
1004401B ARP00035 200 2 Center
1004404B ARP00035 200 3 Center
1004438B ARP00035 200 4 Center
1004439B ARP00035 200 5 Center
1004440B ARP00035 200 6 Center
MIDWEST
1004400A-MEP ARP00035MEP 100 2 End
1004402A-MEP ARP00035MEP 100 3 End
1004405A-MEP ARP00035MEP 100 4 End
1004401B-MEP ARP00035MEP 200 2 Center
1004404B-MEP ARP00035MEP 200 3 Center
1004438B-MEP ARP00035MEP 200 4 Center
1004439B-MEP ARP00035MEP 200 5 Center
1004440B-MEP ARP00035MEP 200 6 Center
MILBANK
U8212-XL-KK-BLG K5T 100 2 End - For OH Entrance Only
U8213-XL-KK-BLG K5T 100 3 End - For OH Entrance Only
U8214-XL-KK-BLG K5T 100 4 end - For OH Entrance Only
U5902-X-KK K5T 100 2 Center
U5903-X-KK K5T 100 3 Center
U5904-X-KK K5T 100 4 Center
U5905-X-KK K5T 100 5 Center
U5906-X-KK K5T 100 6 Center
U1252-X-KK-K3-BLG K5T 200 2 Center
U1253-X-KK-K3-BLG K5T 200 3 Center
U1254-X-KK-K3-BLG K5T 200 4 Center
U1255-X-KK-K3-BLG K5T 200 5 Center
U1256-X-KK-K3-BLG K5T 200 6 Center
U5882-X-KK K5T 200 2 Center
U5883-X-KK K5T 200 3 Center
U5884-X-KK K5T 200 4 Center
U5885-X-KK K5T 200 5 Center
U5886-X-KK K5T 200 6 Center
S2143-XL-KK K5T 200 Left
100 Right
2 End
MURRAY
RM291PR RX112FJ 200 2 Center
RM391PR RX112FJ 200 3 Center
RM491PR RX112FJ 200 4 Center
SIEMENS
SUA2311-OPZ(A) 659-0121 100 2 Center
SUA2311-OPGP 659-0121 100 2 Center
SUA3311-OPZ(A) 659-0121 100 3 Center
SUA3311-OPGP 659-0121 100 3 Center
SUA4311-OPZ(A) 659-0121 100 4 Center
SUA4311-OPGP 659-0121 100 4 Center
SUA2717-YPZ(A) 659-0121 200 2 Center
SUA2717-YPGP 659-0121 200 2 Center
SUA3717-YPZ(A) 659-0121 200 3 Center
SUA3717-YPGP 659-0121 200 3 Center
SUA4719-YPZ(A) 659-0121 200 4 Center
SUA4719-YPGP 659-0121 200 4 Center
SUA5719-KPZ(A) 659-0121 200 5 Center
SUA5719-KPGP 659-0121 200 5 Center
SUA6719-KPZ(A) 659-0121 200 6 Center
SUA6719-KPGP 659-0121 200 6 Center
SQUARE D
1004400A-SQD ARP00035SQD 100 2 End
1004402A-SQD ARP00035SQD 100 3 End
1004405A-SQD ARP00035SQD 100 4 End
1004401B-SQD ARP00035SQD 200 2 Center
1004404B-SQD ARP00035SQD 200 3 Center
1004438B-SQD ARP00035SQD 200 4 Center
1004439B-SQD ARP00035SQD 200 5 Center
1004440B-SQD ARP00035SQD 200 6 Center
TALON (formerly Landis + Gyr (L+G)) (See Note #6)
UA2311-0PGP 659-0121 100 2 Center
UA2B11-0PZA 659-0121 100 2 Vertical - For OH Entrance Only
UA3B11-0PZA 659-0121 100 3 Vertical - For OH Entrance Only
UA3311-0PGP 659-0121 100 3 Center
UA4311-0PGP 659-0121 100 4 Center
UA2717-YPGP 659-0121 200 2 Center
UA3717-YPGP 659-0121 200 3 Center
UA4719-YPGP 659-0121 200 4 Center
UA5719-KPGP 659-0121 200 5 Center
UA6719-KPGP 659-0121 200 6 Center

MOST RECENT CHANGES

DATE MFG. CATALOG # STATUS REASON
08/2013 Milbank ALL Approved New Approval

NOTES:

  1. All meter bases listed in this table are "ringless" style.
  2. Bypass horns are required in each meter position.
  3. Meter bases used for 208/120 volt, 3 wire services must have a 5th terminal installed in the 9 o'clock position. The catalog number for the 5th terminal is listed in the "5th Terminal Accessory" column in the table and must be specified when purchasing the meter base.
  4. The manufacturer's catalog number must be stamped on the outside of the meter base so that it will be visible after the base is installed. The number must not be stamped on the cover.
  5. When aluminum conductors are used, the electrical contractor must apply the corrosion inhibiting compound recommended by and in the manner prescribed by the cable manufacturer.
  6. Suffix (A) on Talon (formerly L+G) bases indicates the addition of security provisions. Bases with or without this suffix are approved.