Table 1

Approved Meter Service Devices

(print from .pdf)

Effective April 14, 2021
Updates All Previous Tables

Single Phase, Single Position
Overhead Entrance
100, 200 or 400 Amp 120/240 or 208/120 Volt
4 or 5 Terminal
200 or 400 Amp or 240/480 Volt
5 Terminal

MFG. & CATALOG # 5TH TERMINAL ACCESSORY IF REQUIRED SERVICE AMPS DIMENSIONS (INCHES) TERMINAL SIZE (AWG OR KCMIL) BYPASS TYPE
(See Note #2) HxWxD MIN. MAX
CUTLER HAMMER
1004162A-CH ARP00035CHJ 100 107/8x 8 x 31/2 8 2/0 Horn
1004161A-CH ARP00035CHJ 200 14 x 8 x 43/8 8 250 Horn
1004159A-CH ARP00035CHJ 200 15 x 11 x 43/8 8 350 Horn
1004984A-CH ARP00326CH 400
(Cl 320)
365/8 x 15 x 6 See Note #6 Lever
DURHAM
1004162A ARP00035 100 107/8 x 8 x 31/2 8 2/0 Horn
1004161A ARP00035 200 14 x 8 x 43/8 8 250 Horn
1004159A ARP00035 200 15 x 11 x 43/8 8 350 Horn
1004984A ARP00326 400
(Cl 320)
365/8 x 15 x 6 See Note #6 Lever
MIDWEST
1004162A-MEP ARP00035 100 107/8 x 8 x 31/2 8 2/0 Horn
1004161A-MEP ARP00035 200 14 x 8 x 43/8 8 250 Horn
1004159A-MEP ARP00035 200 15 x 11 x 43/8 8 350 Horn
1004984A-MEP ARP00326 400
(Cl 320)
365/8 x 15 x 6 See Note #6 Lever
MILBANK
U7487RL-KK-TG-BLG K5T 100 101/2 x 8 x 35/16 6 2/0 Horn
U7021-RL-TG-KK-BLG K5T 200 151/2 x 8 x 41/8 6 250 Horn
U1079-RRL-K3-BLG K3866 400
(Cl320)
387/8 x 131/4x51/4 See Note #6 Lever
U1779-R-K3-BLG K3866 400
(Cl320)
387/8 x 131/4x51/4 See Note #6 Lever
MURRAY
RJ-193AXJ RX112FJ 100 117/10 x 8 x 35/8 6 2/0 Horn
RB-193CXJ RX112FJ 200 144/5 x 8 x 41/2 6 350 Horn
SIEMENS
SUAT111-OPGP 659-0121 100 117/10 x 8 x 35/8 6 2/0 Horn
SUAT317-OPGP 659-0121 200 144/5 x 8 x 41/2 6 350 Horn
S44704-82 -------- 400
(Cl 320)
34 x 20 x 6 See Note #6 Lever
S44704-82PP -------- 400
(Cl 320)
34 x 20 x 6 See Note #6 Lever
SQUARE D
1004162A-SQD ARP00035SQD 100 107/8 x 8 x 31/2 8 2/0 Horn
1004161A-SQD ARP00035SQD 200 14 x 8 x 43/8 8 250 Horn
1004159A-SQD ARP00035SQD 200 15 x 11 x 43/8 8 350 Horn
1004984A-SQD ARP00326SQD 400
(Cl 320)
365/8 x 15 x 6 See Note#6 Lever
TALON (formerly LANDIS & GYR) See Note #5
UAT111-OPGP 659-0121 100 117/10 x 8 x 35/8 6 2/0 Horn
HUAT111-OPGP 659-0121 100 117/10 x 8 x 35/8 6 2/0 Horn
UAT317-OPGP 659-0121 200 144/5 x 8 x 41/2 6 350 Horn
HUAT317-OPGP 659-0121 200 144/5 x 8 x 41/2 6 350 Horn
44704-82 -------- 400
(Cl 320)
34 x 20 x 6 See Note #6 Lever
44704-82PP -------- 400
(Cl 320)
34 x 20 x 6 See Note #6 Lever

MOST RECENT CHANGES

DATE MFG. CATALOG # STATUS REASON
12/2017 Talon (formerly Landis & Gyr) 9810-9802 Removed 600 Amps (CI 480) (Bolt-in metering)
12/2017 Note 7 Removed

480 V Meter Bases

4/14/2021 Milbank U7021-RL-TG-KK-BLG Revised Incorrectly noted as U7021-RL-KK-TG-BLG

NOTES:

  1. All meter bases listed in this table are "ringless" style. Horn bypasses are required in all ringless bases. Class 320 bases must contain a lever bypass rated 100% continuous duty.
  2. Meter bases used for 208/120 volt, 3 wire services must have a 5th terminal installed in the 9 o'clock position. The catalog number for the 5th terminal is listed in the "5th Terminal Accessory" column in the table and must be specified when purchasing the meter base.
  3. The manufacturer's catalog number must be stamped on the outside of the meter base so that it will be visible after the base is installed. The number must not be stamped on the cover.
  4. When aluminum conductors are used, the electrical contractor must apply the corrosion inhibiting compound recommended by and in the manner prescribed by the cable manufacturer.
  5. Prefix "H" on Talon (formerly Landis & Gyr) bases indicates bases that are sold through national retailers.
  6. 320 Amp Meter Bases:
    • All 320 amp meter bases contain stud terminals.
    • Only UL approved lay-in or box style connectors suitable for use with copper or aluminum conductors can be installed for wire termination on the studs.
    • Compression connectors are not permitted.

    320 AMP METER BASE CONNECTOR REQUIREMENTS

      Line Side Terminals Line Side Neutral Terminals Load Side Terminals
    WIRE RANGE Single Only 350 to 750 Kcmil 4/0 Awg to 500 Kcmil Single--Up to 600 Kcmil Double--Up to 350 Kcmil

    APPROVED CONNECTORS FOR 320 AMP METER BASES

    MFG. Line Side Terminals Line Side Neutral Terminals Load Side Terminals
    CUTLER HAMMER ARP00129CH ARP00129CH Single - ARP00129CH
    Double - ARP00427CH
    DURHAM ARP00129 ARP00129 Single - ARP00129
    Double - ARP00427
    MIDWEST ARP00129MEP ARP00129MEP Single - ARP00129MEP
    Double - ARP00427MEP
    MILBANK K3863 K1540 Single - K1540
    Double - K1350
    SQUARE D ARP00129SQD ARP00129SQD Single - ARP00129SQD
    Double - ARP00427SQD
    TALON/SIEMENS 56476 60162 Single - 60162
    Double - 56732
  7. All meter bases listed in this table are rated 600 volts AC unless otherwise noted.